Gripp Clamping Of Workpieces - Allmatic TeleCentric Instructions De Service

ALLMATIC
8.1.2

GRIPP Clamping of Workpieces

Fig. 9: Stepped jaws with GRIPP strip
With GRIPP clamping, unmachined, non-parallel workpieces or raw materials are clamped.
Workpiece pre-milled:
– Strength up to 1,000 N/mm²
Raw materials:
– Strength up to 550 N/mm²
– Parallelism error up to 0.3 mm
TeleCentric
Clamping | 8
EN
61 / 400