Navigating The Menu - Siemens SITRANS F Serie Guide De Mise En Route

Quick Terminal Mode Setup
1. Access [HyperTerminal], then select [HyperTerminal.exe].
2. In [Connection Description] dialog box, enter a connection name (e.g. FUS1010). Click
3. In [Phone Number] dialog box, select [Direct to COM 1 (or COM 2)]. Click [OK] to select.
4. In [Properties] dialog box, enter RS-232 parameters. Click [OK].
5. At terminal screen, click [File]. Select [Properties].
6. Select [Settings] tab. At [Emulation] box, select [VT-100].
7. Select [ASCII Setup]. In [ASCII Sending] uncheck boxes. In [ASCII Receiving] check
8. At Terminal screen, type: Menu. Press <ENTER> to access Installation Menu.
Hint: Type: Menu 1000 for longer connection time.
3.2

Navigating the Menu

Installation Menu Navigation
The Installation Menu Chart is a multi-level structure divided into three columns from left to right
Level A - lists the major menu categories.
Level B - list the menu cells associated with Level A. You can enter data into Level B menu cells
Level C - lists the Level B data
Level A
Table 3- 1 5-Key Touch Keypad and PC Keyboard Function Chart
Sensor
ENTER Key
Left / Right Keys
Up / Down Keys
SITRANS FUS1020 IP65 NEMA 4 Quick Start
Operating Instructions (Compact), 4/2009, CQO:QSG006 Revision B
[OK].
[Append line feeds to incoming line ends.]. Click [OK].
Store numeric data, select from option lists, etc.
Menu navigation keys move cursor.
Same as <Left> and <Right> keys. Scrolls option lists and graphic display screen.
Level B
Recall Site Setup
Channel Enable
Create/name Site
Site Security
Delete Site Setup
Save/Rename Site
Description
Commissioning
3.2 Navigating the Menu
Level C
Pump 1
Pump 2
15