Information For The End-User - Kemper MaxiFil Mode D'emploi

1.3 Information for the End-user

The operating instructions are an essential part of the MaxiFil.
The end-user shall ensure that operators take note of these instructions.
Based on national regulations for accident prevention and environmental protection,
the operating instructions are to be supplemented by the end-user's own operating
instructions, including information on regulatory and reporting requirements to meet
specific operating requirements, such as work organization, workflow and staff
employed. Apart from the operating instructions, as well as the regulations applicable
in the country and place of use concerning accident prevention, the recognized
technical rules for safe and professional work must be observed.
Without the approval of KEMPER GmbH, the end-user may not make any
modifications, additions or conversions to the MaxiFil that might affect safety! Spare
parts used must comply with KEMPER GmbH's specified technical requirements.
This is always guaranteed by using original spare parts!
Use only trained or instructed personnel for the operation, maintenance, repair and
transport of the MaxiFil. Make clear to the staff, who is responsible for the operation,
maintenance, repair and transport.
Art.-Nr.: 150 2489
Technical changes and errors excepted.
KEMPER MaxiFil Operating Instructions - EN
- 38 - Rev.: 01
Latest update: 06/2015