Sygonix 1405314 Mode D'emploi page 3

Operating instructions
GB
Hotspot WLAN Surveillance camera
Item no. 1405314
Intended use
The product is used as a surveillance camera. Operation or programming is
controlled with the app "Mini WiFi Cam" . It runs on any smartphone or tablet
with an Android™ or Apple iOS operating system.
Footage is directly transmitted to the smartphone or tablet via the integrat-
ed WLAN hotspot. In addition, the camera can be integrated into an existing
WLAN network. The camera is also equipped with the option to store footage
on a micro SD card.
The product is powered by the AC adapter enclosed.
This product complies with the applicable national and European require-
ments. All names of companies and products are the trademarks of the re-
spective owners. All rights reserved.
Package contents
• Surveillance camera incl. mount
• Power supply
• Assembly material
• Allen key
• Gloves intended for the assembly
• Operating instructions
Up-to-date operating instructions:
1. Open www.conrad.com/downloads in a browser or
scan the displayed QR code.
2. Select document type and language and enter the item
number into the search field. After submitting the que-
ry you can download displayed records.
Explanation of symbols
The symbol of the lightning bolt is used to indicate health hazards, e.g.,
electric shock.
This symbol indicates specific risks associated with handling, operation
or use.
The arrow symbol points to special tips and operating information.
Safety instructions
The warranty will be void in the event of damage caused by failure to
observe these safety instructions. We do not assume any liability for any
resulting damage!
We do not assume any liability for material and personal damage caused
by improper use or non-compliance with the safety instructions. The
warranty/guarantee will be void in such cases!
• For safety and approval (CE) reasons, unauthorised conversion and/or
modification of the product are not permitted.
• The design of the power adapter complies with Protection Class II.
• The mains socket for the AC adapter should be near by the device and
easily accessible.
• The product and the AC adapter are suited for indoor usage in dry loca-
tions only. Do not expose these product components to direct sunlight,
heat or cold, damp or wet conditions; otherwise damage may occur.
The AC adapter poses the risk of a potentially life-threatening electric
shock!
• Do not unplug the power adapter from the mains socket by pulling on
the cable.
• Do not touch the power adapter, if it is visibly damaged; danger of fatal
electric shock!
Switch off the power supply to the power outlet to which the plug
transformer is connected (e.g., switch off at the corresponding circuit
breaker or remove the safety fuse and then switch off the correspond-
ing RCD). Only then unplug the power adapter from the mains socket
and take the product to a specialised workshop.
• The product is not a toy and does not belong in the hands of children.
• Do not leave packaging material unattended; it can turn into a danger-
ous plaything in the hands of children.
• Handle the product with care; impacts, blows, or accidental falls, even
from a low height, will damage it.
• If you have any questions that are not answered in these operating
instructions, please contact our technical support centre or consult a
professional.
Camera assembly and connection
Installing the camera
• If you need wall plugs to fasten the camera mount on the wall (depending
on the wall condition), mark the exact location for the drill holes through the
screw holes in the wall mount.
Make sure you do not damage any existing wires or pipes when drilling
mounting holes or tightening screws.
• Fasten the wall mount to the wall with the screws (and wall plugs, if neces-
sary).
Connecting the camera
• You only need to connect the camera to the power supply. Configuration
and operation ensue wirelessly via WLAN.
• If you intend to also use a memory card, insert it now into the card slot. The
card slot is on the right side of the camera.
If a memory card is inserted, only automatic recording is possible in mo-
tion detection mode.
When facing the camera, the micro SD cards contacts should point to-
ward you.
• Slide the card into the slot so that it clicks into place.
• If you want to remove the card later on, push down on the card so that it
unlocks. Then remove it from the slot.
• Connect the outlet of the AC power supply enclosed to the socket provided
on the camera. This is located at the bottom, on the part that points toward
the hinge of the mount.
• Now plug the power supply into a power outlet.
• The camera will start automatically.
Downloading the app
• Open the appropriate App Store on your smartphone or
tablet. For Android™, this is e.g., "Google Play Store" .
If you are using an iPhone, iPad or an iPod Touch, open
Apple's "iTunes Store" .
• Search for the application "Mini WiFi Cam" and install it.
• You can also easily scan the following QR code that applies for your system.
You will be directed to the page of the appropriate store.
Android
TM
Also consider the system requirements in the technical data section of
these instructions and the description of the app in the respective store.
Connecting the smartphone/tablet to the camera
• Open the appropriate WLAN settings on your smartphone or tablet. You will
find the item WLAN in the settings menu on your device.
• Connect your device to the WLAN of the camera. This is "IPCAM_XXXXXX".
The 6 X differ on all cameras. The network is not encrypted; you do not
need to enter a password.
• Once the connection is established, start the previously installed app "Mini
WiFi Cam".
Apple iOS