Led Indicators - Belden HIRSCHMANN OZD Modbus Plus G12 Manuel

4 LED Indicators

4 LED Indicators
i OZD
Modbus Plus
System
Port 1
Port 2
Port 3
Fig. 14: LED indicators on front panel
Version 04 07/2014
Port 1
System
Green: Repeater in operation, data traffic occurring
Red: – No data received at Port 2 and/or Port 3
(e.g. cable breakage)
– No data traffic at any port for over 500 ms
Not lit: – No voltage supply
– Internal device fault
Port 1 (electrical)
Green: Input signal applied
Orange: No input signal at any port for over 500 ms
Not lit: Currently no input signal at this port
Port 2 (optical)
Green: Input signal applied
Orange: No input signal at any port for over 500 ms
Not lit: Currently no input signal at this port
Port 3 (optical)
Green: Input signal applied
Orange: No input signal at any port for over 500 ms
Not lit: Currently no input signal at this port
43