Before You Begin; Tools And Parts Needed; Parts Included; Installation Accessories - Gaggenau VG 415 211 CA Notice De Montage

Before You Begin

T ools and Parts Needed
B e f o r e Y o u B e g i n
Screwdriver Torx T20
▯
Pencil
▯
Drill with ¼" (6 mm) bit
▯
Jigsaw
▯
Tape Measure
▯
Note: Additional materials may be necessary for
installation in solid surface countertops. Contact the
countertop manufacturer.

Parts Included

Installation accessories

AA 414 010 Ventilation molding, for operation next to
the VL 414 downdraft ventilation
VA 420 000 Connection strip for combination with
other Vario appliances in the 400 series
for flush installation
VA 420 010 Connection strip for combination with
other Vario appliances in the 400 series
for surface-mounted installation
VA 440 010 Stainless steel appliance cover

Cabinet Requirements

The minimum spaces that must be maintained when
installing the gas cooktop shall be:
A minimum 12" (300 mm)
B minimum 12" (300 mm)
C minimum 30" (762 mm) clearance between
the top of the cooking surface and the
bottom of combustible constructions
D minimum 1 9 /
16
E minimum 15" (380 mm)
F minimum 18" (457 mm)
G maximum 13" (330 mm)
The distance from the top of the cooktop to the bottom of
cabinets above can be reduced to 26" when the bottom of
the wood or metal cabinet is protected by not less than
¼" (6.35 mm)-thick flame-retardant millboard covered
with not less than No. 28 MSG sheet metal, 0.015 inch
(0.4 mm) stainless steel, 0.024 inch (0.6 mm) aluminum
or copper.
Before You Begin
" (40 mm)
en-us
9