Appendices; Technical Specifications - Eaton Evolution Pulsar Serie Manuel D'installation Et D'utilisation

6. Appendices

6.1 Technical specifications

Output power
AC input power
Rated input voltage
Input-voltage range
Input-frequency range
Output on battery power
Voltage
Frequency
Battery (sealed lead acid,
maintenance free)
Standard
Additional modules
possible (up to 4 EXB)
Environment
Operating temperature
range
Storage temperature range
Relative humidity
Noise level
(1) The high and low thresholds can be adjusted using Personal Solution-Pac software.
(2) Up to 40 Hz in low-sensitivity mode (programmable using Personal Solution-Pac software.
(3) Adjustable to 200 V (10% derating of output power) / 208 V / 220 V / 230 V / 240 V.
(4) Battery Evolution S EXB 1250/1750: 2 strings, each 4 x 12 V / 9 Ah.
(5) Battery Evolution S EXB 2500/3000: 2 strings, each 6 x 12 V / 9 Ah.
When the appliance is used in EU area, use an external circuit breaker in front of line with rating 16A, 250V which is
IEC/EN 60898-1 standard compliant;
When the appliance is used in America area, use an external circuit breaker in front of line with rating 20A, 250V.
This product is designed for IT power distribution system.
34008236EN/AC - Page 20
Transformer
Filter
(AVR)
Evolution S
1250VA/1150W
4 x 12 V
7.2 Ah
Evolution S EXB 1250/1750
Charger
Battery
Evolution S
1250 1750
1750VA/1600W
Single phase 220~240 V
47 to 70 Hz (50 Hz system), 56.5 to 70 Hz (60 Hz system)
230 V (+6/-10%)
4 x 12 V - 9 Ah
(4)
20 to 90% (without condensation)
< 45 dBA
Inverter
Evolution Evolution S
2000 2500
2000VA/1600W 2500VA/2250W 3000VA/2700W
(1)
160 V to 294 V
(3)
50/60 Hz ±0.1%
6 x 12 V
7.2 Ah
No Evolution EXB S 2500/3000
0 to 40°C
-25°C to 40°C
Evolution S
3000
(2)
6 x 12 V
9 Ah
(5)
< 50 dBA