Appendices; Technical Specifications - Eaton Pulsar Série Manuel D'installation Et D'utilisation

6. Appendices

6.1

Technical Specifications

Output power
AC input power
w Input voltage range
w Nominal input voltage
w Frequency
w Power factor
Load output
w Voltage
w Frequency
w Harmonic distortion
w Overload capacity
w Current
Battery, sealed lead acid, main-
tenance free
Environment
w Operating temperature range
w Relative humidity
w Leakage current
w Storage temperature range
w Altitude
Standards and certification
w Safety
w EMC
w Surge suppressor
(1) EXB Module for EX 1000 and EX 1500
(2) EXB RT2U Module for EX 1000 RT2U and EX 1500 RT2U.
(3) 900W, in standard configuration, 800W with at least 1 EXB connected
(4) 1290W in standard configuration, 1200W with at least 1 EXB connected
(5) Values for 33% / 66% / 100% of nominal power rating
(6) Adjustable from 100V to 127V using the UPS Config software
(7) Frequency-converter mode is programmable using the UPS Config software
(8) Nominal, for 120V output voltage
EX 1000
EX 700
EX 1000 RT2U
700 VA / 630W 1000 VA /900 W
Single phase 60 / 70 / 80 V to 142 V
120 V
50/60 Hz autoselect
> 0.95
Single phase 120 V ±3%
50/60 Hz ±0.5%
< 4% for linear load, < 6% for nonlinear load
102% continuous, 130% 12s, > 130% 2s
5.8 A 8.3 A
(8)
2x12 V – 7Ah 3x12 V – 7Ah
20% to 90% (without condensation)
UL 1778 (4th edition), CSA C22.2 No 107.3-05
FCC Subpart B, class A
IEEE/ANSI 62.41
EX 1500
EX 1500 RT2U
1500 VA /1290 W
(3)
(5)
(6)
(7)
12.5 A
(8) (8)
3x12 V – 9Ah
0°C to 40°C
< 1.1mA
-25°C to 40°C
1000 m
EX EXB 1000/1500 (1)
EX EXB 1000/1500 RT2U
(4)
Two string of
3x12 V -9 Ah
86-86700-00EN A02 - Page 27
(2)