SOUNDMASTER BCD480 Mode D'emploi page 13

Press VOLUME- (1) to decrease the volume, the minimum level of volume is level 0.
•
• Press VOLUME+ (2) to increase the volume, the maximum level of volume is level 30.
Presetting radio stations
The device can preset up to 20 radio stations. To preset a station, follow the steps below:
1. Search for a station as described in "Scanning stations".
2. Press MODE/RPT/RND (10) enter into preset mode, the LCD DISPLAY (9) with the wordings "PROG" will flash, and
the preset number P01 will show on the LCD display.
3. Press FOLDER/MEMORY - (15) or FOLDER/MEMORY+ (16) to select your desired memory number P01 to P20.
4. Press MODE/RPT/RND (10) again to confirm your memory setting, PROG will stop flash and the radio frequency of
your preset station will display.
5. Repeat the above steps, you can store your desired stations.
Recalling preset radio stations
1. Select the preset location with the FOLDER/MEMORY + (16) or FOLDER/MEMORY - (15) buttons.
Automatic stations scan
1. Search for a station as described in "Scanning stations".
2. Press MODE/RPT/RND (10) enter into preset mode, the LCD DISPLAY (9) with the wordings "PROG" will flash, and
the preset number P01 will show on the LCD display.
3. Press PLAY/PAUSE (3) once, it will automatically scan all radio stations and store 20 preset stations.
Note:
The scan will only stop after all 20 preset locations have been filled.
•
The order cannot be changed once set.
•
PLAYING CD/MP3
Press POWER (1) to turn on the unit.
•
Press FUNCTION (2) to select mode in "CD" to play CD disc.
•
• Release CD DOOR LOCK (22), open the CD COMPARTMENT (20) and place a CD/MP3 disc with the label face to
you in the CD compartment.
• Close the CD door and compress the CD door lock.
After a few seconds the total number of songs/tracks is shown in the display.
•
Note: In the case of CD in MP3 format the number of folders is briefly displayed at first.
• The CD will play from the first title. The current track and the CD or MP3 message are shown on the display.
Note: With CD in MP3 format the current track and folder are shown alternately in the display.
The volume of radio is default in level 15.
•
LCD display shows "CD" and the CD track when playing CD disc.
•
• During CD playback, press PLAY/PAUSE (3) to pause CD playing and press PLAY/PAUSE (3) again to resume
playback.
• Press TUNE+ (8) once to the next track or press and hold TUNE+ (8) when playing until you find your desired track.
Press TUNE- (7) once to back to previous track or press and hold TUNE- (7) when playing until you find your desired
•
track.
Press STOP (4) to stop CD playback.
•
Press VOLUME- (1) to decrease the volume, the minimum level of volume is level 0. Press VOLUME+ (2) to increase
•
the volume, the maximum level of volume is level 30.
Always keep the CD deck closed.
Note:
• If no disc is inserted, the message "NO" appears on the display.
If a disc inserted incorrectly, the message "Err" appears on the display.
•
Playback of CDs produced by the user cannot be guarantee due to large variety of software ad CD media available.
•
3
M_BCD480 / English Instruction Manual