Changing Device Passkey
The passkey used to pair Blackbird with your mobile
phone can be changed here.
Bluetooth Indicator Light
When Blackbird is seated in its cradle, or is being used in handheld mode, the smaller
blue LED light surrounding the inner ring of the navigation wheel will indicate the
Bluetooth condition as follows:
Discovery Mode
Bluetooth Connected When Bluetooth is on and connected the light will remain on.
Incoming Call
Active Call
Pairing Your Bluetooth Enabled Mobile Phone
1
Go to Bluetooth Setup and power on Bluetooth.
2
Start Discover Mode.
3
On your mobile phone, make sure Bluetooth is on, then search for
Bluetooh devices.
4
Select Blackbird and enter the passkey shown on the Blackbird
screen.
5
The inner ring of the navigation wheel on your Blackbird should
remain on, indicating your mobile phone is connected.
When Discovery Mode is activated the light will flash for 30 seconds.
Three quick flashes indicate an incoming call.
The light will continue to slowly pulse during an active call.
35