Docking With Iva-W205; Removing Blackbird From Iva-W205; How To Reset Blackbird - Alpine Blackbird PMD-B200 Manuel D'utilisation

Docking with IVA-W205

1

Removing Blackbird from IVA-W205

1

How to Reset Blackbird

In the event the system requires a reset, pull over in a safe and legal manner before
doing so. Press the reset button on the bottom for at least 1 second. Then, to restart
the system, press and hold the power button for 2 seconds. The system will re-start.
1
Open IVA-W205 head unit monitor.
2
2 Insert Blackbird into the unit with the screen facing
up and the navigation wheel on the left.
3
Press Blackbird firmly into place.
4
Touch
5 Select
Additional On-Screen Buttons
When Blackbird is docked, two additional on-screen
buttons allow you to conveniently access additional
system features.
Touching this button will give you access to the
A/V Head Unit's display control.
NOTE:
If left idle for more than 5 seconds, the
system will automatically return to the Blackbird
navigation screen.
Touching this button will display Blackbird's music
screen. Refer to page 38 for more information on the
music functions.
1
Touch
2
Press the eject button.
3
Remove Blackbird from the head unit.
2
Close
to close IVA-W205 face.
Blackbird
as a source.
Open
on the screen.
9