Battery Charger Configuration - Ghibli 5 Serie Utilisation Et Entretien

11.1.m - B attery charger configuration
(Fig. 37)
WARNING:
The machine comes pre-configured for
use with "Sonnenschein" gel batteries.
DANGER:
This operation must be performed only by
a qualified technician.
Standard configuration with Sonnen-
schein gel batteries
- Take off the case (A) of the external bat-
tery charger and check that the switches
(1 - 2 - 3 - 4) are set to the configuration
shown in figure (B).
Perform the following operations to modify
the configuration:
Configuration for gel batteries other than
the Sonnenschein typology
- Check that the switches (1 - 2 - 3 - 4) are
set to the configuration shown in figure
(C).
Configuration for acid batteries
- Check that the switches (1 - 2 - 3 - 4) are
set to the configuration shown in figure
(D).
WARNING:
Only modify switches (1 - 2 - 3 - 4); do not
alter the positions of switches (5 - 6 - 7 -
8).
A
ON
1 2 3 4 5 6 7 8
B
C
D
EN - 35
EN
Fig. 37