11.1.c - Cleaning the wiper (Fig. 27)
In order to clean the squeegee correctly (2),
it is necessary to remove it as follows:
-
Disconnect the hose (1) from the squee-
gee (2).
-
Loosen the knobs (3) and remove the
squeegee (2).
-
Wash the squeegee and in particular the
rubber blades (4) and the inside of the as-
piration connector (5).
NOTE:
If, during washing, it is clear that the rubber
blades (4) are damaged or worn, it is neces-
sary to replace them or turn them over.
-
Replace all the components in reverse
order.
11.1.d – Cleaning the side skirts
(Fig. 28)
In order to clean the side skirts (1) correctly,
it is necessary to remove them as follows:
-
Loosen the knobs (2) and remove the
side skirts (1).
-
Wash the rubbers (3).
NOTE:
If, during washing, it is clear that the rubber
blades (3) are damaged or worn, it is neces-
sary to replace them or turn them over.
-
Replace all the components in reverse
order.
5
Fig. 27
1
3
EN - 29
2
4
EN
1
3
2
Fig. 28