Adjusting The Pressure Of The Squeegee; Checking The Wear Status Of The Three Wheels - Ghibli 5 Serie Utilisation Et Entretien

11.1.j - Adjusting the pressure of the
squeegee (Fig. 34)
- Start up the machine and press the
button.
The wiper unit will be lowered.
- Engage the machine's forward move-
ment, move it a few metres, engage the
parking brake and get off the machine.
- Use the threaded bar (1) to adjust the
squeegees' (2) contact with the floor.
Turn it clockwise for increased contact
and counter clockwise for less contact.
NOTE:
When the squeegee is making proper con-
tact with the floor, there will be no streaking
on the floor during machine function and the
entire length of the squeegee will be in con-
tact with the floor.
11.1.k - Checking the wear status of
the three wheels (Fig. 35)
- Check the wear status of the three wheels
(1) periodically; if they appear worn or
damaged, contact a technical service
centre in order to have them replaced.
DANGER:
Operating the machine with worn or dam-
aged wheels poses a danger to the opera-
tor as the machine could have less trac-
tion when turning.
2
1
EN - 33
EN
1
OK
2
Fig. 34
1
Fig. 35