Draining The Recovery Water - Ghibli 5 Serie Utilisation Et Entretien

EN
10.1 - DRAINING THE
RECOVERY WATER
(Fig. 23)
DANGER:
Before lifting the recovery water tank (1)
make sure it is empty.
At the end of the washing cycle or when the
recovery water tank (1) is full, it is necessary
to empty the tank by proceeding as follows:
N.B.:
To dispose of the recovery water, comply
with the standards in force in the country in
which the machine is used.
- Position the machine near to a drain out-
let.
- Disconnect the hose (2) from the sup-
port.
- Remove the cap (3) from the hose (2)
and drain all the water contained in the
tank.
N.B.:
The amount of water that comes out can be
modulated by pressing on the end of the tube
(2).
- Put the cap (3) back on the hose (2) and
reposition it on the relative support.
Fig. 23
EN - 26
1
2
3
2