Unloading The Machine From The Wooden Pallet - Ghibli 5 Serie Utilisation Et Entretien

2.1.c - Unloading the machine from
the wooden pallet (Fig. 4-5)
- Position a ramp (1) and fasten it to the
wooden pallet.
- Remove the wooden blocks (2) from the
three wheels.
- Sit on the seat in driving position.
- Check that the switches (3) and (4) are
turned on the "0" position.
- Release the parking brake by pushing the
locking device (6).
Keep the brake (5) engaged to avoid
movements of the machine.
- Start the machine by turning the key (7)
to the "I" position.
- Shift the movement direction selector (8)
to " " (forward) or " " (reverse), then
press the accelerator pedal (9) and drive
down the pallet using the ramp.
5
Fig. 5
6
2
Fig. 4
EN - 11
EN
1
8
7
4
3
9
2