Adjustment Options; Freewheel Switch: Pushing The Wheelchair - You-Q LUCA XL Manuel D'utilisation

6.5

Adjustment options

Adjustment options are those parts of a
wheelchair that can be adjusted by the
user without the use of tools. The Luca
XLcan be ordered with the following
adjustment options:
Mechanical adjustment options
•
Comfort legrests
•
Swing-away joystick holder
SEATING
•

Headrest
XL SEATING
Electrical adjustment options
•
Electrical tilt adjustment

XL SEATING
•
Electrical high/low option

XL SEATING
•
Electrical backrest adjustment

CONTROLLER
•
Electrical legrests
6.6 Freewheel switch: pushing
the wheelchair
The wheelchair can also be moved by
pushing. For this purpose, the motors
must be disengaged. This is done with a
freewheel switch; one for each motor.
The freewheel switch can be set to two
positions:
•
'Drive' mode. In this position, the
chair can not be pushed (a in figure
6.5).
•
'Push' mode. In this position, the
chair can not be driven using the
controller (b in figure 6.5).

XL SEATING

XL

CONTROLLER
43
Figure 6.4
Figuur 6.5