Accessories - GYS 054783 Mode D'emploi

Translation of the original instructions
COILED INDUCTOR EN

ACCESSORIES

Afin de pouvoir intervenir sur des pièces à formes multiples, 3 types d'accessoires accompagnent l'inducteur.
3 coiled wire (Ø 18, 24, 30 mm)
Standard tool, already shaped for a fast and effective operation. The coil shape enable optimises the concentration of
the magnetic fields in its centre, which guarantees a powerful and effective induction heating. The glass fiber circle
can electrically insulate the coils as well as the element to heat. The coil is used in the following way : position it at
the centre then press the inductor's button to start the heating.
Heating efficiency :
To achieve maximum heating power efficiency, the coil must be adapted to the workpiece.
Flexible braided wire
The braid is designed for pieces that cannot be heated with the coil (parts with a bigger diameter) :
Ex. an exhaust pipe or a wheel hub
The braid can be enrolled around the metal piece.
To obtain a better result, circle 3 times around the metal piece and make sure that the coils are bonded together. Press
the inductor's button to start the charge.
Straight rigid wire
The straight rigid wire is designed to suit any of the user's needs. It can be :
- adjusted to the shape of a specific part/piece.
- adjusted to a piece that is too big for the coils.
- copy the shape of an existing coil if the latter is damaged.
It works in the same way as coils and braided wire. Its shape must be adjusted to fit the metal piece's shape and if
possible, circle around the piece several time for maximum efficiency.
fig.2
13