Waste Management - GYS 054783 Mode D'emploi

Translation of the original instructions
Maintenance
• If the power supply cable is damaged, it must be replaced by the
manufacturer, its service agent or an equally qualified person.
• Service should be performed by a qualified person
• Warning! Always remove the power plug from the wall socket be-
fore carrying out any work on the device. Inside, voltages and
currents are high and dangerous.
• The device is maintenance-free
• Under no circumstances should solvents or other aggressive clea-
ning agents be used.
• Clean the device's surfaces with a soft, dry cloth.
Regulations
• Device complies with europeans directives.
• The certificate of compliance is available on our website.
• EAC Conformity marking (Eurasian Economic Community).

Waste management

• This product should be disposed of at an appropriate recycling
facility. Do not throw away in a domestic bin.
• The product's manufacturer contributes to the recycling of its
packaging by contributing to a global recycling system.
• This product should be recycled appropriately
DESCRIPTION
The coiled inductor has been designed to heat ferrous metallic elements by induction heating. Its main purpose is the
unjamming of parts such as bolts or exhaust pipes.
Carry cas econtents:
The coiled inductor is supplied in a carry case that contains t(see fig.1) :
- The inductor, 1 ,
- 3 coiled wired, diameter 18 mm / 24 mm / 30 mm 2 ,
- a flexible braided wire
- a straight rigid wire 4 .
COILED INDUCTOR
3 ,
Coiled wired Ø18 mm
054806
Coiled wired Ø24 mm
054790
Coiled wired Ø30 mm
055469
Flexible braided wire
054813
Straight rigid wire
054868
EN
11