Standby Menu; Language Selection; Entering Company Data - Waeco AirCon Service Center ASC 2500 G LE Notice D'utilisation

ASC 2500 G LE / ASC 3500 G LE
7.2

Standby menu

The standby menu shows you the current supply quantities and the time
settings of the AirCon Service Center.
The following information is shown:
 Refrigerant quantity
 Fresh oil quantity
 UV-additive quantity
 Time
 Date
7.3

Language selection

1. Press the cursor keys  or  to access the basic menu.
2. In the basic menu, use the cursor keys  or  to select "Other
selections":
3. Press ENTER to confirm.
4. Use the cursor key  to select "Service".
5. Press ENTER to confirm.
6. Enter the password "5264".
7. Use the cursor keys  or  to select the preferred language.
8. Press ENTER to confirm.
9. Press STOP. The language chosen is active and the standby menu
is displayed.
7.4

Entering company data

The company data is printed out with every service log.
1. In the basic menu, use the cursor keys  or  to select "Other
selections":
2. Press ENTER to confirm.
3. Use the cursor key  to select "Service".
4. Press ENTER to confirm.
EN
Short selection
Free selection
Other selections
ENTER-OK
Short selection
Free selection
Other selections
ENTER-OK
Initial start-up
87