Intended Use Environment; Technical Description - MIETHKE Tunneller Mode D'emploi

Tunneller

2.07 INTENDED USE ENVIRONMENT

2.08 TECHNICAL DESCRIPTION

Fig. 1: Tunneller, comprising a handle (1) and tunnelling
rod (2) with a transport protection cover (3)
Tunneller
Fig. 2: Handle, comprised of a recessed handle (1a) and
locking rocker (1b)
Fig. 3: Tunneller handle lengthwise (left) and crosswise
(right)
Fig. 4: Tunnelling rod, left, with the sharp (2a) and, right,
with the blunt (2b) end, catheter hole (2c) and marking
(2d) only on standard rods
CAUTION
Catheters with a diameter of > 2.6 mm cannot
be used with the Tunneller as this may dam-
age the catheter material.
Tunneller
Tunneller
EN