Maintenance Instructions; General Maintenance - MINN KOTA MK106D Manuel De L'utilisateur

MAINTENANCE INSTRUCTIONS

GENERAL MAINTENANCE

• Check battery charger for dirt, oil, battery corrosion, etc. Use a water and baking soda solution for cleaning corrosion. Wipe
clean using a dry cloth.
• Check clips for dirt, oil, and battery corrosion; then disconnect from battery posts and clean as necessary with water and
baking soda solution and dry with a clean cloth.
• When the charger is not in use, coil the power cord and output cord to prevent damage.
• When storing the battery charger, store in a clean dry area.
• If power cord or plug becomes damaged, you may contact the Minn Kota Service Repair Department for service repair
information. Otherwise, dispose of the battery charger in compliance with local law. Damaged cords and plugs can cause
electric shock or electrocution.
Damaged cords and plugs can cause electric shock or electrocution.
Model Part No.
MK106D 1821065
MK210D 1822105
MK220D 1822205
MK315D 1823155
MK330D 1823305
MK330DS 1823304
MK440D 1824405
Model Part No.
MK106D 1821065
MK210D 1822105
MK220D 1822205
MK315D 1823155
MK330D 1823305
MK330DS 1823304
MK440D 1824405
©2017 Johnson Outdoors Marine Electronics, Inc.
DANGER
MECHANICAL SPECIFICATIONS
Banks Input Cable
1 18AWG - 6"
2 18AWG - 6"
2 18AWG - 6'
3 18AWG - 6'
3 18AWG - 6'
3 18AWG - 8.5'
4 18AWG - 6'
ELECTRICAL SPECIFICATIONS
Output per Bank
System Volts
(amps)
12 6
12 / 24 5
12 / 24 10
12 / 24 / 36 5
12 / 24 / 36 10
12 / 24 / 36 10
12 / 24 / 36 / 48 10
Output Cable Size L x W x H
16AWG - 6' 8-3/4" X 4-3/4" X 3
16AWG - 6' 11-1/2" X 7-1/2 X 4"
16AWG - 6' 13-1/2" X 7-1/2" X 4"
16AWG - 6' 12-1/2" X 7-1/2" X 4"
16AWG - 6' 16-1/4" X 7-1/2" X 4"
16AWG - 6' 16-1/4" X 7-1/2" X 4"
16AWG - 6' 11-34" X 6-3/4" X 8"
Total Output
(amps) (120VAC, 60Hz)
6
10
20
15
30
30
40
Weight (lbs)
4.5
11
15
14
20
20
22.5
Input Current Input Power
(120VAC, 60Hz)
1A 100W
2.5A 200W
4.4A 470W
2.7A 270W
5.2A 500W
5.2A 500W
7A 620W
minnkotamotors.com | 19