Blanco drink.soda EVOL-S Pro Mode D'emploi page 47

Changing CO₂ cylinders
Remove empty CO₂ cylinder.
You may hear a slight hissing
sound, which is completely
normal.
₂
Insert a new CO cylinder.
CO₂ cylinders are easy to order from our online shop (www.blanco.com/soda)
Make sure that the
CO₂ cylinder is in the
right position.
The right position is im-
portant: when inserting the
cylinder, screw it in until
the mechanical stop. Then
tighten with another 1/4 turn
so that the cylinder is firmly
in place.
3 sec
Confirm replacement
by pressing "CO₂" for
3 seconds.
The CO₂ capacity is reset
and the system is ready for
operation again.
47