Changing Co₂ Cylinders - Blanco drink.soda EVOL-S Pro Mode D'emploi

Changing CO₂ cylinders
The CO₂ cylinder can be changed with a few simple steps.
46
Blue LED on the mixer tap is
flashing rapidly and CO₂ is
flashing on the display: the
CO₂ cylinder needs to be
changed.
The CO₂ symbol is flash-
ing and the remaining CO₂
capacity is at 0 % – the CO₂
cylinder is empty.
Open the flap.
The CO₂ cylinder usually
contains a residual amount
of CO₂, even if the display is
showing 0 %. The appliance
can therefore continue to be
used as long this does not
have an adverse effect on
the sparkling function.
If the carbon dioxide level
drops significantly or the
pressure is no longer suffi-
cient for sparkling water, the
cylinder must be replaced
for good.