Dimplex DF3033ST Manuel Du Propriétaire page 13

Operation
Figure 6 - Remote Control Functions
A. Room Temperature
B. Set Temperature
C. Dimmer
D. Flame Speed Control
E. Sleep Timer
F. Flame & Heat On/Off
G. Temperature Down
H. Temperature Up
I. Dimmer Down
J. Dimmer Up
K. Flame Speed Down
L. Flame Speed Up
M. Sleep Timer Down
N. Sleep Timer Up
to 8 hours).
Press the F button
the fireplace on.
To set the sleep timer press
the N button.
Set the timer from 30 minutes
through 8 hours. The fireplace
will automatically turn off when
the sleep timer reaches zero
(0) minutes.
The Sleep Timer can be can-
celled at any time by pressing
the M button repeatedly until
the sleep timer displays noth-
ing.
G
I
K
M
F. Flame & Heat On/Off Button
to turn
!
B
D
F
Press the F button
the Flame/Heat function on.
When B is higher then A the
heat will come on. To turn the
heat off, lower the B so that
it's setting is lower then the A.
The default temperature set-
ting is 72°F (22°C).
NOTE: When using the re-
mote control the heater runs
on a thermostat. Press the H
or G buttons to adjust the set
temperature. Once the desired
set temperature is reached the
heater will turn off. The heater
will cycle on and off to main-
A
H
C
J
L
N
E
to turn
13