Locking And Unlocking The Screen - LG PRADA P940 Guide De L'utilisateur

note:
• use only compatible memory
cards with your phone. using
incompatible memory cards
may damage the card and
data stored on the card, as
well as the phone.
• the file size supported by
fat3 can be used with a
capacity of less than 4GB.
warninG:
Do not insert or remove the
memory card when the phone
is on. Doing so may damage the
memory card as well as your
phone, and the data stored
on the memory card may be
corrupted.
to format the memory card:
Your memory card may already
be formatted. If it isn't, you must
format it before you can use it.
note: all files on your memory
card are deleted when it is
formatted.
1. On the Home screen, touch the
to open the application list.
2. Scroll and touch settings >
storage.
3. Touch unmount sd card.
Touch erase sd card > erase sd
4.
card > erase everything
5. If you have set a pattern lock, input
the pattern lock then select erase
everything.
note: if there is content on
your memory card, the folder
structure may be different after
formatting as all the files will
have been deleted.
locking and unlocking the
screen
If you do not use the phone for a
while, the screen is turned off and
locked automatically. This helps
to prevent accidental touches and
saves battery power.
When you are not using the LG-
P940, press the Power/Lock key
to lock your phone.
If there are any programs running
when you set lock screen, they
may be still running in Lock mode.
It is recommended that you exit
all programs before entering