Installation; Connection Of The Back Panel - SOPRO COMEG 210 Manuel D'utilisation

E N G L I S H
5

INSTALLATION

Take care that the location of the light source is well-ventilated (minimum 15cm space on left, right, and rear
side of the light source).
5.1. CONNECTION OF THE FRONT PANEL
• This light source is equipped as standard with a Storz light cable adapter 1 .
• Insert your light cable in the "light guide" hole [C1] until a "click" is heard.
• Connect your endoscope to the other tip of the light cable.

5.2. CONNECTION OF THE BACK PANEL

• Connect the power cable to the mains plug of the light source [C2].
• Connect this power cable to the mains.
• If needed, connect a grounding cable to the ground contact identified with a green and yellow washer and the
following sign :
For the USA and Canada, you must use the "hospital grade" cable supplied and connect it to a "hospital
grade" mains outlet.
1. Other adapters available on request.
6 0 1 1 1 2 3 C