Electromagnetic Compatibility - SOPRO COMEG 210 Manuel D'utilisation

ELECTROMAGNETIC COMPATIBILITY

11.1 GUIDE AND DECLARATION BY MANUFACTURER – ELECTROMAGNETIC EMISSIONS
The reference system, "Xenon light source" is designed to be used within the electromagnetic environment
specified below. The user should ensure that it is indeed used within this environment
Emissions test
RF emissions
CISPR 11
RF emissions
CISPR 11
Harmonic emissions
EN 61000-3-2
Voltage fluctuations / flicker
EN 61000-3-3
0 1 1 1 2 3 C
E N G L I S H
Compliance
The reference system, " Xenon light source " only uses radioelectrical
Group 1 energy for its internal subsystems. Therefore, it emits very low RF
energy and is not likely to interfere with nearby electronic devices.
Class B
The reference device, " Xenon light source ", can be used in all
domestic premises, included premises directly connected to the
public low-voltage power distribution network used for powering
buildings for residential use.
Conform
The reference system, " Xenon light source ", can be used in all
premises other than residential premises and premises connected
directly to the public low-voltage power distribution network
used for powering residential buildings.
Conform
11
Electromagnetic environment - Guide
1 3