jbc AD 2950 Mode D'emploi Rapide page 5

Changing the handpiece's cartridge
With the Advanced system, the cartridge can
be changed quickly, without turning off the
station, so you have two soldering irons in one.
Here is what to do to change the cartridge:
1 - Place the handpiece and remove the
cartridge.
2 - Place the handpiece on top of the new
cartridge, press it slightly down and remove
the handpiece.
B
3 - Press the cartridge into the opening A, B or C:
A. For straight 2210 cartridges.
B. For curved 2210 cartridges.
C. For 2245 cartridges.
XX XXXXX
Alignment
Important.
- It is essential to insert the cartridge till the
end for a good connection. Take the mark
as reference.
4
ENGLISH
C
A