Music Server - Pioneer FS-W40 Mode D'emploi

> Before Start > Part Names

Music Server

a
b
e
f
28
> Install > Setup
It is possible to stream music files stored on PCs or NAS
devices connected to the same network as this unit. The
network servers this unit is compatible with are those PCs
with players installed that have the server functionality of
®
Windows Media Player 11 or 12, or NAS that are
compatible with home network functionality. You may need
to make some settings in advance to use Windows Media
Player 11 or 12. Note that only music files registered in the
library of Windows Media
Configuring Windows Media
®
Windows Media
1. Turn on your PC and start Windows Media
2. In the "Library" menu, select "Media Sharing" to display a
dialog box.
3. Select the "Share my media" check box, and then click
"OK" to display the compatible devices.
4. Select this unit, click "Allow" and put a check mark next to
c
the icon for this unit.
5. Click "OK" to close the dialog.
0 Depending of the version of Windows Media
d
there may be differences in the names of items you can
select.
®
Windows Media
1. Turn on your PC and start Windows Media
2. In the "Stream" menu, select "Turn on media streaming"
to display a dialog box.
0 If media streaming is already turned on, select "More
streaming options..." in the "Stream" menu to list players
in the network, and then go to step 4.
g
3. Click "Turn on media streaming" to list players in the
network.
4. Select this unit in "Media streaming options" and check
h
that it is set to "Allow".
5. Click "OK" to close the dialog.
> Playback
®
®
Player can be played.
®
Player
Player 11
®
Player 11.
®
Player,
Player 12
®
Player 12.
Supplementary information | Firmware Update | Others
0 Depending of the version of Windows Media
there may be differences in the names of items you can
select.
Playing
®
1. Start the server (Windows Media Player 11, Windows
®
Media Player 12, or NAS device) containing the music
files to play.
2. Make sure that the PCs and/or NASs are properly
connected to the same network as this unit.
3. Switch the input on the TV to that assigned to the unit.
4. Press NET on the remote controller.
5. With the cursors on the remote controller, select "Music
Server", and then press ENTER (b).
6. Select the target server with the cursors on the remote
controller and press ENTER (b) to display the items list
screen.
7. With the cursors on the remote controller, select the
music file to play, and then press ENTER (b) to start
playback. To return to the previous screen, press
0 If "No Item." is displayed, check whether the network is
properly connected.
E
®
Player,
N
(d).