CP FB5-E
Circuit example of operating voltage connection
External fuses
!
EMERGENCY STOP
Earth cable connection at pin 4 designed for 12 A
Terminating resistor on the last fieldbus slave
If the CP system is at the end of the fieldbus system, a cable
termination is required.
Recommendation: Use the Sub-D plug from Festo (part no.
18529) for this purpose. A suitable RC network has already
been fitted into the housing of the Festo Sub-D plug. The cable
termination must be switched manually (refer to manual "CP
fieldbus node 5").
16
10 A
AC
24 V 3,15 A
DC 24 V
0 V
± 10 %
!
9709 NH