Product Overview - Smanos SS2603 Guide Rapide

EN

Product Overview

The solar-powered siren is a totally wireless siren, which can be
installed in driveways, gardens and all types of other external
locations. The strobe siren is battery powered and kept re-
charging by the built-in solar panel. The signal transmission
is all by wireless radio frequency which achieves significantly
wirefree transmission and enhances the flexibility to install.
The strobe outdoor siren can be used as a wireless siren by
connecting to the control panel as well as a standalone alarm
system to work with wireless accessories in same frequency by
learning.
PCB Layout
Siren Duration Setting
VoIume Setting Power On/Off
9V 6F22
Note: The 9V battery is used to charge 18650 battery in case it is out of
power/with low power after a long-time storage. Use the 9V battery to
charge 18650 battery for 12 hours and then remove 9V battery before
installation.
Internal Tamper Switch
Learning Button
Arm/Disarm Tone Setting
Entry&Exit Delay Time Setting
Status LED Indicator
Alarm LED Indicators
External Tamper Switch
Sirens
Note: The siren will sound immediately if the tamper switch is triggered.
* The status LED light flashes every 5 seconds in Arm and Home
Arm mode but doesn't flash at all in Disarm mode.
Jumper Setup
Volume Setting
High Mute
(default)
HIGH MUTE LOW HIGH MUTE
Siren Duration Setting
5 2
minutes minutes
5MIN 2MIN 30S 5MIN 2MIN
Note: To prevent possible hearing damage, it is suggested to avoid listening
at high volume level for long period.
Low
LOW HIGH MUTE LOW
30
seconds (default)
30S 5MIN 2MIN 30S
EN