Smanos SS2603 Guide Rapide page 5

EN
Pairing Remotely with Wireless Accessories
When the siren is working as a standalone alarm system and
installed on the wall, additional Accessories can easily be learnt
to the Siren without the need to dismount the Siren from the
wall, as follows:
1. Make the siren enter service mode.
2. Press [Home arm ] 3 times successively (please make sure a
beep is heard at each time before continuing the next press),
the siren goes into Learn Mode after a long beep is heard and
the status indicator keeps on.
3. Trigger the additional accessory once (Press the test button on
the PIR detector/separate the door contact/press SOS button
on the remote control, etc).
4. The accessory is paired successfully after a second beep and
siren will exit from this Learn Mode.
Note: The siren can be also exit from this Learn Mode by pressing [Arm
on the remote control.
Specifications
Backup Power
Solar Panel Output Current
Maximum Alarm Current
Wireless Receiving Distance
Operation Condition:
Maximum Siren Volume
Static Current
Standby Time
Wireless Receiving Frequency
]
Housing Material
Size (L x W x H)
18650 3.7 V 1800 mAh rechargeable
lithium battery x 1
9 V 6F22 battery x 1
2000 LUX illumination ≥ 4 mA
(in sunlight)
< 700 mA
< 80m (in open area)
Temperature 0°C~+55°C
Relative Humidity <80%
(non-condensing)
110 dB
< 1 mA
< 50 days (fully charged)
868 MHz
PC + ABS + ANTI-UV
309 x 230 x 79.7 mm
EN