Important - Sime MURELLE EQUIPE 100 BOX M Manuel D'installation

FOR THE INSTALLATION TECHNICIAN
CONTENTS
1 DEVICE DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page
2 INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page
3 FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page
4 USE AND MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page
When turning the boiler on for the first time it is best to run the following checks:
– Make sure there are no flammable liquids or materials in the boiler's near vicinity.
– Make sure that electrical connections are correct and that the grounding wire is connected to a good
grounding system.
– Open the gas tap and check the seal on the fixtures including the burner.
– Make sure that the boiler is set to operate with the type of gas supplied.
– Make sure that the exhaust flue is free and/or correctly assembled.
– Make sure that any shutters are open.
– Make sure that the system was filled with water and that all air was drained.
– Make sure the distributor is not obstructed.
– Discharge any air in the gas pipes by using the pressure escape on the gas valve.
FONDERIE SIME S.p.A. located in Via Garbo 27 - Legnago (VR) - Italy declares that its hot water boilers, CE appro-
ved according to Gas Directive 90/396/CEE and equipped with safety thermostat calibrated to maximum 110°C,
are exempt from PED Directive 97/23/CEE application field because they meet the requisites foreseen in arti-
cle 1 comma 3.6 therein.

IMPORTANT

34
39
48
55