Data Protection - Siemens TQ7 Serie Manuel D'utilisation

You can find the Home Connect set-
tings in the basic settings for your ap-
pliance. Which settings the display
shows will depend on whether
Overview of the Home Connect settings
Here you can find an overview of the "Home Connect" settings and network set-
tings.
Basic setting
WiFi connection
Remote start
Add mobile
device
Network informa-
tion
Delete network
settings
Software update
13.2 Data protection
Please see the information on data
protection.
The first time your appliance is
registered on a home network
connected to the Internet, your
appliance will transmit the following
types of data to the Home Connect
server (initial registration):
¡ Unique appliance identification
(consisting of appliance codes as
well as the MAC address of the
Wi-Fi communication module in-
stalled).
Selection
On
Off
On
Off
-
-
-
-
Home Connect has been set up and
whether the appliance is connected
to your home network.
Description
Switch off the wireless module with
prolonged absence or to save energy.
Note: In networked standby mode
your appliance requires max. 2 W.
Switch remote start on the appliance
on and off.
Note: With the "Home Connect" app
only switch-off is possible.
Connect the appliance to "Home Con-
nect" or additional "Home Connect"
accounts.
Display network information and appli-
ance information.
Note: You cannot operate your appli-
ance via the "Home Connect" app
without a network connection.
Note: This setting is only available
with a software update.
¡ Security certificate of the Wi-Fi
communication module (to ensure
a secure data connection).
¡ The current software and hardware
version of your appliance.
¡ Status of any previous reset to
factory settings.
This initial registration prepares the
Home Connect functions for use and
is only required when you want to
use the Home Connect functions for
the first time.
Home Connect en
21