Remote Diagnostics; Information On Data Protection - Siemens CT636LE.6 Mode D'emploi

en Home Connect
Connecting with app
The Home Connect App can be installed on
any number of mobile devices, which can
then be used to connect to the fully auto-
matic coffee machine.
The fully automatic coffee machine must
already be connected to the WLAN network�
■ Open the app on the mobile device�
■ Press button A to open the menu�
■ Touch arrow key L repeatedly until the
display shows "Home Connect".
■ Touch [ Home Connect Settings ].
■ Touch [ Next ]�
■ Touch [ Connect with app ] to connect to
the appliance with the app�
Remote start
If you wish e�g� to start drinks dispensing
on the fully automatic coffee machine via
a mobile device, Remote start must be
activated�
B
Risk of burns!
If an unattended remote start takes
place, third parties might be scalded
if they reach under the coffee dis-
penser during drinks dispensing� You
should therefore make sure that with
an unattended remote start that there
is no risk to other people, in particu-
lar not to children, or to property�
F
The [ Remote start ] text field is is
only visible if connection with Home
Connect has been successfully
completed�
If Remote start is switched off, only
the modes of the fully automatic
coffee machine are displayed in the
Home Connect App�
■ Press button A to open the menu�
■ Touch arrow key L repeatedly until the
display shows "Home Connect".
■ Touch [ Home Connect Settings ].
■ Touch [ Next ]�
■ Touch [ Remote start ] to switch the
function Remote start "On" and "Off"�
50
Device Info
Display for network and device information
■ Press button A to open the menu�
■ Touch arrow key L repeatedly until the
display shows "Home Connect".
■ Touch [ Home Connect Settings ].
■ Touch [ Next ]�
■ Touch [ appliance Info ]� The SSID, IP,
MAC address and serial number of
the appliance are displayed for a few
seconds�
Display
The top right-hand corner of the display
shows the Home Connect status with a
symbol:
Connected to the network
Not connected to the network
No connection to server

Remote diagnostics

In the event of faults, customer service
can use remote diagnostics to access your
appliance� Contact customer service and
ensure that your appliance is connected to
the Home Connect server and check that
the remote diagnostics service is available
in your country�
For more information and to check whether
the remote diagnostics service is available
in your country, please visit the Help &
Support area of the Home Connect website
for your country: www.home-connect.com

Information on data protection

When the fully automatic coffee machine
is connected for the first time to a WLAN
network which is connected to the Internet,
the appliance transmits the following cate-
gories of data to the Home Connect server
(initial registration):
■ Unique appliance identification (con-
sisting of appliance codes as well as
the MAC address of the installed Wi-Fi
communication module)�