Technical Data; Vibration Information; English - Milwaukee M18 HCCT Notice Originale

TECHNICAL DATA

Crimping- and Cutting Tool
Production code
Frequency band
Radio-frequency power
Battery voltage
Nominal force
Compression range : Diameter max.
Copper
Aluminium
Cutting range depends on material
Copper- / Aluminium-Cable max.
Other materials and their diameter are depending on the
specific jaws.
Weight according EPTA-Procedure 01/2014
(Li-Ion 2,0 Ah...9,0Ah)
with press jaws
with cutting jaws
Deviating weights depend on the specific jaws.
Recommended Ambient Operating
Temperature
Recommended battery types
Recommended charger
Noise information
Measured values determined according to EN 62841. Typically, the
A-weighted noise levels of the tool are:
Sound pressure level (Uncertainty K=3dB(A)) 74,6 dB (A)
Sound power level (Uncertainty K=3dB(A))

Vibration information

Vibration total values (triaxial vector sum) determined according
to EN 62841
Vibration emission valuea
h
Uncertainty K=
WARNING!
The vibration emission level given in this information sheet has been
measured in accordance with a standardised test given in EN 62841
and may be used to compare one tool with another. It may be used
for a preliminary assessment of exposure.
The declared vibration emission level represents the main
applications of the tool. However if the tool is used for different
applications, with different accessories or poorly maintained, the
vibration emission may differ. This may significantly increase the
exposure level over the total working period.
An estimation of the level of exposure to vibration should also take
into account the times when the tool is switched off or when it is
running but not actually doing the job. This may significantly reduce
the exposure level over the total working period.
Identify additional safety measures to protect the operator from the
effects of vibration such as: maintain the tool and the accessories,
keep the hands warm, organisation of work patterns.
Deutsch
M18 HCCT
4675 37 02...
3
... 000001-999999
2402-2480 MHz
1.8 dBm
18 V
53 kN
300 mm²
150 mm²
12
35 mm
3,7 kg... 4,3 kg
3,7 kg... 4,3 kg
Device description
1 Hydraulic release button
-18°C ... +50°C
2 Locking bolts
M18B...
M12-18...
3 Die release tabs
4 Crimping jaws
5 Trigger
6 ONE KEY indicator
85,6 dB (A)
7 LED
LED indicator
0,77 m/s
2
1,5 m/s
2
Solid Green
Solid Red
Flashing Red
Flashing Red / Green
(after Solid Green or
Solid Red)
2
11
1
6
4 5
7
11
13
8 Hanger
9 LED /Crimping indicator
10 Battery
11 Handle
Insulated gripping surface
12 Cutting blades
13 Cutting jaws
Definition
Tool completed the operation and reached
full crimping pressure.
Tool completed the operation but did NOT
reach full crimping pressure.
Tool did NOT complete the operation.
Tool has reached its service interval (30000
crimps). Red/Green flashing will begin after
the solid Red or Green indicator for the
operation is displayed.
MILWAUKEE recommends that the device
be inspected and preventative maintenance
completed.
9
8
10
GB

English

17 17