Two, three or four
green lights are
illuminated.
Only one green
light (
)
is illuminated.
No light is
illuminated.
Only one light is
flashing twice per
cycle.
Only one light is
flashing three
times per cycle.
Only one light
is flashing four
times per cycle.
CLEANING THE TOOL
Clean the tool regularly.
14
14
WARNING! Keep your product dry. Under no
circumstances spray with water.
-
To clean the tool, use only mild soap and a damp
cloth.
-
Do not use any type of detergent, cleaner or
solvent which may contain chemicals that
could seriously damage the plastic.
-
Self lubricating bearings are used in your
product, therefore lubrication is not required.
ENVIRONMENTAL
PROTECTION
Waste electrical products should not be disposed
of with household waste. Please recycle where
facilities exist. Check with your Local Authority or
retailer for recycling advice.
DECLARATION OF
CONFORMITY
We,
Positec Germany GmbH
Grüner Weg 10, 50825 Cologne, Germany
Declare that the product,
Description Battery-operated Blower
40V Cordless Blower
The two batteries have a
remaining charge. The more lights
are illuminated, the more battery
capacity.
The battery level of at least one
battery pack is very low. Please
check and charge the battery pack.
At least one battery is not fully
installed or battery may be
defective.
At least one battery is over
discharged (please refer to the
battery charge condition), please
recharge the two batteries at once
before use again or storage.
At least one battery is hot, wait for
them cool down before start again.
The machine is over load. Remove
tool from blowing area and try
again.
Type WG585E WG585E.9 (5 - designation of
machinery, representative of battery-operated
Blower)
Function Blowing
Complies with the following Directives:
2006/42/EC, 2014/30/EU,
2011/65/EU&(EU)2015/863,
2000/14/EC amended by 2005/88/EC
2000/14/EC amended by 2005/88/EC:
- Conformity Assessment Procedure as per Annex V
- Measured Sound Power Level 96.5 dB (A)
- Declared Guaranteed Sound Power Level 99 dB (A)
Standards conform to
EN 60335-1, EN 50636-2-100, EN 62233, EN ISO 3744,
EN 55014-1, EN 55014-2
The person authorized to compile the technical file,
Name Marcel Filz
Address Positec Germany GmbH
Grüner Weg 10, 50825 Cologne, Germany
2020/11/03
Allen Ding
Deputy Chief Engineer, Testing & Certification
Positec Technology (China) Co., Ltd
18, Dongwang Road, Suzhou Industrial
Park, Jiangsu 215123, P. R. China
EN