Accessories; Vibration Information; Assembly And Operation - Worx LEAFJET WG585E Notice Originale

Maximum air
volume
Maximum air
velocity
Battery type
Battery capacity
Charger model
Charger rating
Charging time
(approx.)
Battery pack:
4.0 Ah (1 pc)
4.0 Ah (2 pcs)
Machine weight
** Voltage measured without workload. Initial battery
voltage reaches maximum of 20 volts. Nominal voltage
is 18 volts.
*** Charger output 1 and output 2 mean two ports with
12
the same output voltage and current.
NOISE DATA
A weighted sound pressure
K
pA
A weighted sound power
K
wA
Wear ear protection.

VIBRATION INFORMATION

Typical weighted vibration
Uncertainty
The declared vibration total value may be used for
comparing one tool with another, and may also be used
in a preliminary assessment of exposure.
WARNING: The vibration emission value during
actual use of the power tool can differ from the
40V Cordless Blower
1053 m /h (volume mode)
3
266 km/h (speed mode)
Lithium-Ion
4.0 Ah
WA3883
Input: 100-240 V~
50-60 Hz
Output 1: 20 V ,
2.0 A***
Output 2: 20 V ,
2.0 A***
1 hr
2 hrs
2.9 kg
L = 86.7 dB(A)
pA
L = 96.5 dB(A)
wA
a
declared value depending on the ways in which the tool
is used dependant on the following examples and other
variations on how the tool is used:
How the tool is used and the materials being cut or
drilled.
The tool being in good condition and well maintained
Using the correct accessory for the tool and ensuring it
is sharp and in good condition.
The tightness of the grip on the handles and if any anti
vibration accessories are used.
/
And the tool is being used as intended by its design and
these instructions.
/
This tool may cause hand-arm vibration syndrome
if its use is not adequately managed.
WARNING: To be accurate, an estimation of
/
exposure level in the actual conditions of use
should also take account of all parts of the operating
cycle such as the times when the tool is switched off and
when it is running idle but not actually doing the job. This
may significantly reduce the exposure level over the total
working period.
Helping to minimise your vibration exposure risk.
/
ALWAYS use sharp chisels, drills and blades
Maintain this tool in accordance with these instructions
and keep well lubricated (where appropriate)
If the tool is to be used regularly then invest in anti
1.5 kg
vibration accessories.
Plan your work schedule to spread any high vibration tool
use across a number of days.

ACCESSORIES

Battery pack (WA3014)
Charger (WA3883)
We recommend that you purchase your accessories
3.0 dB(A)
listed in the above list from the same store that sold you
the tool. Refer to the accessory packaging for further
details. Store personnel can assist you and offer advice.
3.0 dB(A)
OPERATION
INTENDED USE
The blower is intended for residential use only. Use the
blower outdoors to move yard debris as needed.

ASSEMBLY AND OPERATION

< 2.5 m/s
2
h
K = 1.5 m/s²
BEFORE OPERATION
WG585E
2
1
ACTION
WG585E.9
/
/
FIGURE
EN