Eu Declaration Of Conformity - brennenstuhl DINORA 5050 Mode D'emploi

Operating Instructions
CLEANING
Before cleaning, disconnect the product from the power supply.
Do not use solvents, caustic cleaning agents or similar products.
Only use a dry or slightly moistened cloth for cleaning.
MAINTENANCE

EU DECLARATION OF CONFORMITY

The declaration of conformity is deposited with the manufacturer.
DISPOSAL
Dispose of electric appliances in an environmentally friendly manner!
Electric appliances must not be disposed of in household waste!
The European Directive 2012/19/EU on Waste Electrical and Electronic Equipment
rules that used electric appliances should be collected separately and recycled in an
environmentally friendly manner.
For possibilities of disposal of the used appliance, please contact your local or municipal
administration.
MANUFACTURER
Hugo Brennenstuhl GmbH & Co. KG
Seestraße 1 – 3 · D-72074 Tübingen
H. Brennenstuhl S.A.S.
4 rue de Bruxelles ∙ F-67170 Bernolsheim
lectra technik ag
Blegistrasse 13 · CH-6340 Baar
For more information, we recommend the Service/FAQs section on
our homepage www.brennenstuhl.com.
8 8
20P126 Mobiler LED Strahler Dinora 210514.indd 8 20P126 Mobiler LED Strahler Dinora 210514.indd 8
ATTENTION: The LED lamp does not contain
components that require maintenance. The light
source of this lamp cannot be replaced If the
light source has reached the end of its service
life, the entire lamp has to be replaced. The lamp
may not be opened.
DINORA
14.05.2021 11:09:30 14.05.2021 11:09:30