Power Jet-Light 2 x 36 W IP 54
7
Cleaning
Pull the main plug before cleaning. Due to reasons of the electrical security, the device is to be cleaned
with a dry or damp cloth. Please do not use any sharp cleaning material or chemicals (solvents, petrol
etc) and no rough sponges. Never dip the working lamp in water.
8
Waste disposal
The product should not be disposed in normal domestic waste at the end of its lifetime. Please enquire
with your city or municipal administration on possibilities of environmentally compatible and appropriate
disposal of the device.
9
Error list
Error
An illuminant is not shining
anymore
Work lamp is not functioning
IMPORTANT:
All further repairs should be carried out only by professionals.
10
Guarentee and Service
We guarantee 2 years for this item.
Repairs are to be conducted only through the authorized specialized dealers.
Damages due to inappropriate handling, non-observance of the operating manual as also replacement
parts (For example illuminant) are exempted from the guarantee.
For further information please see our Service/FAQ section at www.brennenstuhl.com.
11
Declaration of Conformity
The CE-sign was applied in conformance with the following European directives:
2006 / 95 / EC Low Voltage Directive
2004 / 108 / EC EMC Directive
2009 / 125 / EC ErP Directive
The declaration of conformity is lodged with the manufacturer.
Manufacturer:
Hugo Brennenstuhl GmbH & Co. KG, Seestraße 1-3, 72074 Tübingen, Germany
Operating Manual
Possible reason(s)
There is a defect in the illuminant
- Defective power supply or
network cable
- No network connection
- Switch is defective
16
Remedy
Replace illuminant
- Check the earthed
230 V~ socket.
- Check the extension cable
Status: 7201S-07-2007_K