Operating Time; Eco Mode - Sentiotec home.com4 BLACK Instructions D'installation Et D'utilisation

Instructions for use for the user

10.9. Operating time

In the technician menu of the sauna control unit you can now specify
how long the sauna should be in continuous operation (such as 6 h for
private saunas).
1. To refine this setting, use rotary selector 1 to select the runtime
icon. Then press briefly to open the submenu.
► The "Runtime" submenu opens and the last runtime set appears
underlined on the display.
2. Press the rotary selector to change the value.
► The value is now highlighted in green and can be changed.
► The display is in hh:mm.
► Press the rotary selector again to confirm the setting.
► The set value is saved permanently.
3. To exit the submenu, move the cursor to the "Back" icon on the left
and confirm with the rotary selector.

10.10. ECO mode

The ECO function allows you to save energy in breaks between sauna
sessions. When the ECO function is activated, the connected appliances
run with reduced power. You can choose between a 20, 40 or 60-minute
sauna break.
The sauna heater and the vaporizer are switched on again before the
end of the break. In this way the preset temperature and preset humidity
are reached again at the end of the sauna break.
Perform the following steps to activate the Eco-function:
1. Use rotary selector 1 to select the ECO icon. Then press briefly
to open the submenu.
► The "ECO mode" submenu opens and the last break time set
appears underlined on the display.
p. 42/64