Sentiotec home.com4 BLACK Instructions D'installation Et D'utilisation page 79

Installation instructions, only for experts p. 15/64
2. Use a screwdriver to remove housing screw C and lift off the housing cover
from the underside (see Fig. 2).
ATTENTION!
When the housing cover is raised, the on/off switch D and the light switch D are
released from the mounting. Retain these for the duration of the connection work.
D
C
EN
Fig. 2 Remove housing cover
3. Pull gently on ribbon cable E to release it from the connection socket (Fig. 3).
E
Fig. 3 Unplug ribbon cable