Additional Output - Sentiotec home.com4 BLACK Instructions D'installation Et D'utilisation

Instructions for use for the user
Creating your own user programs:
You can create user programs as you would like. A preset user program
is overwritten in the process. Perform the following steps:
1. Start all functions that are to be switched on with the user program.
2. Use rotary selector 1 to select the user programs icon. Then press
briefly to open the submenu.
3. Move the cursor (underscore) to the left to "Save" and briefly press
the rotary selector.
► The settings are stored in the selected user program.
► To switch off user programs, use the All Off function.

10.15. Additional output

Infrared lamps or infra-red heater panels, for example, can be connected
to the additional output on the sauna control unit.
Intensity regulation when the dimmer switch function is activated
When the dimmer switch function for the additional output is activated,
the power for the additional device can be set on a scale of 1 to 7.
The value of 7 corresponds to full power.
1. Use rotary selector 1 to select the additional output icon. Then press
it briefly to confirm.
► The "Additional output" submenu opens and the display shows
the set intensity value for the additional output underlined.
2. Press the rotary selector to change the value.
p. 48/64