Technical Specifications; Overview (Fig. A) - Flex ALC 3/360-G/R 10.8 Notice D'instruction D'origine

ALC 3/360-G/R 10.8
■ Keep the measuring tool, the laser
target plate 16 and the universal holder
13 away from cardiac pacemakers.
The magnets inside the measuring tool,
the laser target plate and the universal
holder generate a field that can impair the
function of cardiac pacemakers.
■ Keep the measuring tool, the laser target
plate 16 and the universal holder 13
away from magnetic data carriers and
magnetically sensitive devices. The effect
of the magnets inside the measuring tool,
the laser target plate and the universal
holder can lead to irreversible data loss.
■ Ensure that battery replacement is
carried out properly. There is a risk of
explosion.

Technical specifications

B
Battery type
Working
Temperature
Claimed voltage
Working time
-Power 1
-power 2
-Power 3
Precision
Laser Wavelengh nm
Laser Power
Laser Grade
Laser Line Width
Sector Angle
Swing Time
Working Angle
Weight (Without
Batterypack)
Working
range w/o
receiver(diameter)
AP 10.8/2.5 AP 10.8/4.0
℃ -10°~40℃
V 10.8
AP 10.8/2.5
≥12h
h
≥8h
≥6.5h
mm/
±0.3mm/m
m
520nm
mW ＜ 10mw
Class Ⅱ
mm/
≤3mm/5m(100Lux)
m
° 360°
S ≤5s
° ≤±4°
Kg 0.8
m ≤100
Working
range with
receiver(diameter)
*The working range may be reduced by
unfavourable environmental conditions (e.g.
direct sunlight).

Overview (Fig. A)

The numbering of the product features refers to
the illustration of the machine on the graphics
page.
1 Exit opening for laser beam
2 Indicator light for laser status
3 ON/OFF button: horizontal laser line
4 ON/OFF button: vertical laser line
5 Indicator light for Laser luminance
6 Switch button for outdoor mode and
brightness control
7 Locking rotary knob
8 State of charge indicator
9 Release button for battery
10 Li-ion battery
11 Laser receiver
12 Magnetic pivoting base
13 Back hanging board
14 Tripod
15 Laser viewing glasses
16 Laser target plate
Operating instructions
WARNING!
Remove the battery before carrying out any
work on the measuring tool.
CAUTION!
Protect the measuring tool against moisture
and direct sun light.
Do not subject the measuring tool to
extreme temperatures or variations in
temperature. As an example, do not leave
m ≤120
17