Modes 2/3 - Panasonic AJ-EC3P Manuel D'utilisation

System connections

Modes 2/3

Camera recorder
To VIDEO OUT connector
(AJ-HDC20A:
To HD HDI OUT connector)
To VIDEO IN connector
The BNC cable end of the cable (included) is not used in mode 2 or 3. Run it alongside the 6-pin
cable and secure it.
<Notes>
≥ For details on the connection of the camera recorder, monitor or other units, refer to their
respective Operating Instructions.
≥ An RCOP cable must be obtained separately if the model AJ-BS900P is going to be used.
Consult your dealer.
To ECU connector
BNC cable
Monitor
BNC cable
6-pin cable
E-5
Cable (included)
To CAM/BS
connector
ECU AJ-
ECU
6 5
∫
1
R B
AJ-EC3P