CAPITAL SPORTS OUTRUN 2XC Mode D'emploi page 37

7
Turn off the switch C_6/C_7 to reset the
locking mechanism after completely fold
the treadmill.
Moving the unit
The treadmill can be moved horizontally and vertically after folding. Please
follow the following steps to move and store the treadmill.
Note: Make sure that the power switch is turned OFF, and the power cord
is disconnected before moving the treadmill. Make sure that the left and
right column locking mechanisms are closed.
1
Vertical movement: lift the treadmill from
the rear end cap D_1, move the treadmill
to the desired position with the two
longitudinal wheels D_2 below the motor
cover.
Note: Before folding the treadmill,
make sure that the treadmill has
stopped running completely and the
power cord has been pulled out. Do not
force the treadmill before unlocking
the locking mechanism. When lock-on
or lock off the locking mechanism,
make sure its rotating area is free of
obstruction.
2
Horizontal movement: erect the treadmill
and move it to the desired position with
the two horizontal wheels D_3 in front of
motor cover.
EN
37