Installing the Wall-
Mount Bracket
To Sony Dealers
WARNING
The following instructions are for Sony
dealers only. Be sure to read safety
precautions described above and pay
special attention to safety during the
installation, maintenance and checking
of this product.
Do not install the Wall-
Mount Bracket on wall
surfaces where the
corners or the sides of
the TV or LCD Display
protrude away from the
wall surface.
Do not install the Wall-Mount Bracket on wall
surfaces such as a pillar, where the corners
or the sides of the TV or LCD Display
protrude away from the wall surface. If a
person or object happens to hit the
protruded corner or side of the TV or LCD
Display, it may cause injury or property
damage.
Do not install the TV or
LCD Display over or
under an air-conditioner.
If the TV or LCD Display is exposed to water
leaks or air current from an air conditioner
for a long time, it may cause a fire, an electric
shock or a malfunction of the TV or LCD
Display.
Be sure to install the
Wall-Mount Bracket
securely to the wall
following the instructions
in this instruction
manual.
If any of the screws are loose or fall out, the
Wall-Mount Bracket may fall and cause injury
or property damage. Be sure to use the
appropriate screws for the material of the
wall and install the unit securely using
supplied screws and anchors.
Be sure to use the
supplied screws and
attachment parts
properly following the
instructions given in
this instruction
manual. If you use
substitute items, the
TV or LCD Display may
fall and cause bodily
injury to someone or
damage to the TV or
LCD Display.
Be sure to assemble the
bracket properly
following the instructed
procedure explained in
this instruction manual.
If any of the screws are loose or fall out, the
TV or LCD Display may fall and cause bodily
injury to someone or damage to the TV or
LCD Display.
− 4 (US) −
Be sure to tighten the
screws securely in the
designated position.
If you fail to do so, the TV or LCD Display may
fall and cause bodily injury to someone or
damage to the TV or LCD Display.
Be careful not to subject
the TV or LCD Display to
shock during installation.
If the TV or LCD Display is exposed to shock,
it may fall or break apart. This may cause
injury.
Be sure to install the TV
or LCD Display on a wall
that is both
perpendicular and flat.
If you fail to do so, the TV or LCD Display may
fall and cause injury.
After proper installation
of the TV or LCD Display,
secure the cables
properly.
If people or objects get tangled with cables,
this may result in injury or damage to the TV
or LCD Display.
Do not allow the AC
power cord or the
connecting cable to be
pinched.
If the AC power cord or the connecting cable
is pinched between the unit and the wall or
is bent or twisted by force, the internal
conductors may become exposed and cause
a short circuit or an electrical break. This may
cause a fire or an electric shock.