CAMPAGNOLO SUPER RECORD Mode D'emploi page 31

• If the brake pads are not equidistant
from the rim, proceed with centering
them (B - Fig. 6), using a 2 mm Allen
wrench.
B
6
6.2 - REPLACING THE BRAKE PADS
• Check the wear status of the brake
pads at regular intervals and replace
them when the braking surfaces reach
the limit marked by the wording "WEAR
LIMIT" or if braking power is in any way
insufficient (Fig. 7).
WARNING!
The wear limit
is the bottom
of the grooves.
7
ENGLISH 31