ResMed AirFit P10 Mode D'emploi page 12

Resistance
Environmental
conditions
Gross dimensions
Mask setting options
Notes:

The mask system does not contain PVC, DEHP or phthalates.

This product is not made with natural rubber latex.

The manufacturer reserves the right to change these
specifications without notice.
Storage
Ensure that the mask is thoroughly clean and dry before storing it for
any length of time. Store the mask in a dry place out of direct
sunlight.
Disposal
This mask does not contain any hazardous substances and may be
disposed of with your normal household refuse.
8
Drop in pressure measured (nominal)
at 50 L/min: 0.4 cm H
at 100 L/min: 1.4 cm H
Operating temperature: +41°F to 104°F (+5°C to
+40°C)
Operating humidity: 15% to 95% non-condensing
Storage and transport temperature: -4°F to 140°F
(-20°C to +60°C)
Storage and transport humidity: up to 95% relative
humidity non-condensing
Large:
23.23" (H) x 5.87" (W) x 1.18" (D)
(590 mm (H) x 149 mm (W) x 30 mm (D))
Mask frame system (no headgear)
For S9: Select 'Pillows'
For other devices: Select 'SWIFT' (if available),
otherwise select 'MIRAGE' as the mask option.
O
2
O
2